Fireground.Trainingby RescueFit
19 Nov 2026Inside the Gear: the radio, a film and a hands-on look inside a portable radio, from the mic and the noise to the board. More → all updates

Inside the Gear

SCBA: inside every breath

Follow the air from the cylinder to the facepiece. A three-minute film, then take it apart and work it yourself. Best with the sound on.

Film 3 minutes, 15 chaptersExplore Work the pack yourselfSound The pack’s own, best onCost Free, no sign-in

Pressure reducer: the pressure reducer cut open in red section on the backframe, its springs and pistons inside

Pressure reducer · 0:54

The primary does the work

A spring and a piston meter cylinder pressure down to about 110 psi. The backup stands by.

RIC/UAC: air drawn in green running from the RIC/UAC fitting through the reducer and up into the cylinder

RIC/UAC · 1:15

Refilling the cylinder

Air goes back into the cylinder through a check valve, not to the mask. The wearer keeps breathing.

Mask-mounted regulator: the mask-mounted regulator cut open in red section on the facepiece, the demand valve and the diaphragm inside

Mask-mounted regulator · 1:36

A breath opens the valve

The diaphragm follows the lungs. In, the demand valve opens. Out, the exhalation valve lifts.

PASS: the console on the shoulder strap with the PASS: the red manual alarm, the yellow reset, the status light and the remote gauge

PASS · 2:12

Twenty seconds still

Pre-alert climbs for twelve seconds. Then full alarm. Yellow button twice to reset.

After the film

Then work it yourself

Explore mode: the pack on its stage beside the panel of switches for the cylinder valve, the regulator, breathing and the purge
  1. Spin itDrag to orbit, pinch or scroll to zoom.
  2. Open the cylinderTap the handwheel. The startup plays: Vibralert, three chirps, the HUD.
  3. Breathe on itDock the regulator, switch on Breathe and watch the demand valve work.
  4. Hit the purgeTap the red knob and follow the air around the regulator.
  5. Set off the PASSHold still for the pre-alert, press the red button for the alarm, yellow twice to reset.
  6. Cut it openSection views of the pressure reducer and the regulator, on or off.

See how your equipment works inside. Watch it, then work it yourself.

The demo shows a 3M Scott Air-Pak X3 Pro. It is an independent training demonstration by Fireground.Training, not affiliated with or endorsed by 3M.

Watch and explore